Gabatarwa ga Hanyar Shigarwa na Tashoshin Wutar Lantarki Masu Yawan Aiki

1. Core shigarwa ƙa'idodi
Csiriri: Tshi clamba syanayin ƙasa must bkuma kept csiririn wanind free Lallaif Lallaixide layers, LallaiThe stains, wanind dmai kyau.
Fshekaru: Tshi clamba syanayin ƙasa szai iya bkuma fshekaru wanind slaushi, A cikinba tare da burs wanind pnasa.
Fƙarfafawa: INtare da tshi correct torca fko fmai ƙarfafa gwiwa, kumatabbatarwa waniƙarancin clamba palbarkatu.
Mhaɗawa: Terminals, A cikinfushi, crimping tkayan aiki/bolts must mciwon kai sƙayyadaddun bayanai.
Shia Dnissipation: KUMAntabbas tha thdakumarminals hwanikuma propera hkumaa dnissipation cLallaisharuɗɗa tLallai wania cikinoid oa cikindumama.

2. Pgyara bkafin nishigarwa
Tkayan aiki wanind Mkayan ado:
Torca Tkayan aiki: Tshi Mtsattsarka Cal'ada KUMAkayan aiki! A can daidaita torca A cikinwurin shakatawa (kumalantarki Lallair mshekara-shekara) must bkuma a cikinamma, kuma shi ne scikin wahala fan haramta tLallai a cikintare da wani rna yau da kullun A cikinwurin shakatawa tLallai tƙara ƙarfi bkuma fkifin ruwa.
Clamba Rwanzuwa Tester (ABINCIzaɓi bfita Ran yaba): INamma tLallai a cikinerif nishigarwa qdaidaito.
Cjingina tkayan aiki: fyana da sda takarda (suku wanis 600# Lallair wanibove), wanimai ruwa wanilcohol, na kan-A cikintanda fgashi.
Clamba rwanzuwa pmako/pmai biya cakasin haka gsake dubawa: a cikinamma fko csamawanina fitilu chulɗa Lallair Lallaiwaje/corrosive kumayanayi, nko: not Lallaina yau da kullun bgaba ɗaya, pkayayyaki cdauke da cmai aiki fin ba haka ba suku wanis Tare datare da pmai ƙasa wanisake rake buƙata.
Mmai sauƙi ttasiri: A cikinƙasa caliper (ckash A cikinfushi cros-ssassa wanirea wanind terminal waniperture).
Crimping tmai kyau (kuma.g. crimping t(tashoshi): Hydraulic Lallair mna fasaha crimping pɗaure tyana da mciwon kai tshi terminals.
A kunnena sirri prmai yiwuwa eqkayan aiki: ninmai rufi gltumaki, gLallaigles.

Niduba wanind Cjingina:
Ckash tshi terminals wanind A cikinwahalhalu: Ctabbatarwa cewa ran yi masa cƙiyayya, a cikintsofaffi, wanind cros-ssassa wanirea Lallaif tshi A cikinires mƙugiya. Ckash cewa tshi terminal bsihiri nis free Lallaif crumfunan ajiya wanind deformation.
Csiririn clamba syanayin ƙasa:
Fko cmafi girma Lallair tan haɗa shi terminals, nif Lallaioxided (d(an yi masa ado), lmai sauƙi skuma A cikinda fyana da sda takarda nin tshi same dtayar da hankali a cikinhar zuwa tkai revel wani mƙabilanci szuwa, tkaza csiririn wanind dry A cikinda wanilcohol. Fko silver-pmai latti terminals, nhar abada skuma wanind csiririn Lallainly A cikinda wanilcohol. Csiririn tshi A cikinfushi saiki (Lallair tshi clamba syanayin ƙasa Lallaif terminal stafiya Lallair kumakayan aiki terminals nif nit nis wani bolt hzama terminal).

3. Matakan shigarwa na gaba ɗaya (idan aka ɗauki nau'in haɗin da aka fi amfani da shi a matsayin misali)
Mataki na 1: Kafin a yi wayoyi magani
Dangane da tsawon cirewar da tashoshin ke buƙata, ana amfani da kayan aiki na musamman don cire rufin don tabbatar da cewa babu wata illa ga mai tuƙi.
Ga zare masu igiyoyi da yawa, yi ƙoƙarin kiyaye yanayin da ya makale kuma ka matse shi kaɗan. Ga wayoyi masu girman sashe, ana ba da shawarar a matse su da hanci na musamman (kwandunan ruwa) kafin a haɗa su.

Mataki na 2: Aiwatar da Manna Mai Rarrabawa (idan ya dace)
A shafa wani siririn man shafawa mai hade-hade a saman da aka tsaftace (bangon ciki na tashoshin, Masu Haɗa Waya, da kuma saman zare na waya). Aikin shine hana iskar shaka, hana lalatawa, da kuma cike gibin ƙananan gibin. Bai kamata ya yi kauri sosai ba.

Mataki na 3: Saka kuma daidaita
Saka wayar ko hancin waya mai ƙunci a cikin ramin ƙarshen. Tabbatar an saka wayar gaba ɗaya zuwa ƙarshe, ba tare da masu jagoranci da aka fallasa a waje da yankin matsi ba. Daidaita ramukan da aka ɗora kuma a saka a cikin injin wanki (idan akwai) da injin wanki na bazara.

Mataki na 4: Haɗa ƙarfin juyi
Ta amfani da makullin ƙarfin juyi, matsewa bisa ga ƙimar ƙarfin juyi na hukuma da masana'antar tashar ta bayar. Idan bayanai ba su samuwa ba, duba ƙa'idodin samfura iri ɗaya (amma ana ba da shawarar ingantaccen bayanai sosai).
Jerin Maƙallan: Ga tashoshi masu ƙusoshi da yawa (kamar ƙusoshi biyu ko huɗu), ya kamata a matse su ta kusurwa, a haɗa su, kuma mataki-mataki.

Mataki na 5: Duba na ƙarshe
Duba gani: babu wayoyi masu sassauƙa, babu nakasu na tashoshi marasa kyau, da kuma ƙusoshin da aka sanya a wurin.
Ji yadda ake dubawa: Yi ƙoƙarin girgiza wayar a hankali, bai kamata a sami jin daɗi ba.
Alamomi: Idan ya cancanta, yi alamomi da aka manne (kamar zana layukan hana motsi).