PVC mkpuchi ọdụ

Njikọ ozugbo, arụmọrụ a pụrụ ịdabere na ya - Nhọrọ Kachasị Mma maka Nkwụsị Eletriki

✅ Ntinye Ngwa Ngwa Ngwa-Ngwa
0.25" (6.35mm) obosara agụba nkịtị na-amị amị n'ime ihe nkwụnye ọkụ. Achọghị mbelata okpomọkụ– Ntinye ngwa ngwa nke 50%.

✅ Mkpuchi PVC Na-adịgide Adịgide
Aka uwe PVC dị elu (asambodo CE) na-eguzogide -20°C ruo 80°C, mmanụ, asịd na nchacha na-eguzogide ya. Ọkpụrụkpụ: 0.8mm ±0.1mm.

✅ Nduzi ọla kọpa echekwara
Mgbọrọgwụ ọla nwere ihe mkpuchi tin, nke a tụrụ maka 15A na-aga n'ihu ugbu aIke ntinye dị ala (15N ike ndọpụta).

✅ Njikwa Polarity Anya
Ihe mkpuchi uhie/acha anụnụ anụnụ/edo edo maka njirimara AWG/usoro (Uhie: 22-16AWG, acha anụnụ anụnụ: 16-14AWG, acha odo odo: 12-10AWG).

Nchedo zuru oke, njikọ ozugbo - Nkwụsị eletriki na-enweghị ihe egwu

✅ Mkpuchi gbọmgbọm 100%
Uwe aka PVC kechie ya nke ọma gbọmgbọm ígwè (asambodo CE), na-ewepụ ihe ndị na-eduzi ihe mberede. Na-egbochi mkpụmkpụ mberede na ihe mberede eletrik - Nchekwa 100% dị mma maka imetụ aka.

✅ Arụmọrụ Nkwụsị Ngwa Ngwa
Oghere agụba 0.25" (6.35mm) nwere isi iyi mkpọchi esemokwu, ihe nkwado 5,000+ usoro ndị enyiNdochi 70% dị ngwa karịa skru.

✅ Ogologo oge ụlọ ọrụ mmepụta ihe
Njikọ ọla kọpa a na-eji tin-plated na-eguzogide -20°C ruo 80°C, na-eguzogide mmanụ, asịd, na UV ikpughe.

✅ Koodu agba nke na-egosi njehie
Aka uwe uhie/acha anụnụ anụnụ/edo edo maka njirimara nkebi:Uhie: 22-16AWG, acha anụnụ anụnụ: 16-14AWG, acha odo odo: 12-10AWG.

Njikọ Nlezianya, Nchedo Kachasị - Emebere ya maka Gburugburu Eletriki siri ike

✅ Aka uwe naịlọn nke e ji ihe mkpuchi kpuchie
Aka uwe naịlọn dị elu nke e tinyere n'elu ihe ndị dị n'elu, na-eguzogide ya -40°C ruo +125°C, na-eguzogide mmanụ, mmiri mmiri, na ịma jijiji. Achọghị mbelata okpomọkụ – Ntinye ngwa ngwa nke 50%.

✅ Nhazi ọkwa ndị agha
Isi ọla kọpa e ji tin kpuchie, ike na-eduzi ihe karịrị 28%. Anwalere ya na 20A na-aga n'ihu ugbu a, iguzogide nrụgide ≤0.5mΩ.

✅ Koodu Agba Na-emegide Enweghị Njikọta
Aka uwe uhie/acha anụnụ anụnụ/edo edo na-agbaso ụkpụrụ polarity nke ụlọ ọrụ, ibelata ihe egwu nke njikọghị site na 90%.

✅ Ịkpa Aka nke Abụọ
Ụdị mgbọ a na-agbagharị agbagharị na-arụ ọrụ na crimpers nkịtị (AWG 22-10). Njikọ a pụrụ ịtụkwasị obi nke na-enweghị ihe ọ bụla na-ere ere n'ime sekọnd 3.

Njikọ Waya Edobere - Otu Crimp, Nchedo Ndụ Nile

✅ Aka PVC arụnyere n'ụlọ ọrụ mmepụta ihe
Mkpuchi e tinyere n'ime akpa na-ewepụ mbelata okpomọkụ. Aka uwe PVC dị arọ nke 0.8mm (CE) na-eguzogide -20°C ruo 80°C ma guzogide mmebi mmanụ/acid.

✅ Nhazi ọkwa ndị agha
A na-eme ka gbọmgbọm ọla kọpa a kpụchara akpụcha sie ike Nguzogide , e nyere ya ọkwa maka 30A na-aga n'ihu ugbu aỌ na-adịgide adịgide okpukpu atọ karịa ọla kọpa efu.

✅ Arụmọrụ nke nwere koodu agba
Uhie (16-14 AWG) | Anụ anụnụ (14-12 AWG) | Odo odo (12-10 AWG) maka njirimara nha waya ozugbo.

Uru Ndị Dị Mkpa:

Pịa otu ugboro n'ime ugboro abụọ, enweghị nkụda mmụọ!
E mepụtara ọdụ mgbanaka anyị maka njikọ eletriki ngwa ngwa, ọ nwere atụmatụ ọhụrụ nke "Easy Entry" nke na-eduzi waya n'enweghị nsogbu - zuru oke maka oghere siri ike ma ọ bụ nrụnye kpuru ìsì. Isi ọla kọpa na-enweghị oxygen na-ekwe nkwa ike kachasị na-eduzi, ebe mkpuchi PVC siri ike na-eguzogide okpomọkụ, kemịkalụ, na nkụchi.

Nkọwapụta:

• Onye na-eduzi: Ọla kọpa dị ọcha nke na-enweghị oxygen (99.9%)

• Mkpuchi: PVC nke na-anaghị ere ọkụ (Ọkwa 80°C)

• Ụdị Ọdụ: Mgbaaka (Ụdị O)

• Oke waya: 22-10 AWG / 0.5-6.0 mm²

• Oghere Bọltị: Dabara na M4-M12 Studs

• Asambodo: NKE A / RoHS / ISO9001 / TUV

Ezigbo maka:
▶ Waya Panel Njikwa ▶ Ihe eji ejide ụgbọala ▶ Igbe Ngwakọta Anyanwụ ▶ Ndozi Ngwa

Ihe Mere Ndị Injinia Ji ahọrọ Anyị:
✅ Ntinye Dị Mfe nke Patented - Ntinye ngwa ngwa 50% site na ntuziaka waya gbasawanyere
✅ Mgbochi Mmịpụ - Nguzogide mkpọtụ ka mma 300% yana mkpuchi nchekwa
✅ Mkpuchi Agba E Ji Agba Mee – Uhie (22-16AWG)/Blue (16-14AWG) /Ojii (14-12AWG)Odo (12-10AWG) maka NJ nha ozugbo

Melite usoro ọrụ gị taa - Nhazi zuru oke na ọsọ!

Aha: Gaopeng

Ụdị:SV1.25 /SV2 /SV3.5/SV5.5/SV8/SV14/SV22

Ihe: Ọla kọpa

Mkpuchi: PVC

Njikọ ndị a na-echekwa echekwa nke na-agafe gburugburu ebe dị oke njọ

✅ Uwe agha PVC nke okpukpu atọ
Mkpuchi PVC nke dị 0.8mm dị oke ọkpụrụkpụ na-eguzogide -20°C ruo 80°C, na-eguzogide mmanụ, asịd na mmebi UV. Ọ na-adịgide adịgide karịa aka uwe vinyl ugboro atọ.

✅ Mkpọchi Mgbochi-Mma jijiji
Ejiri aka e ji tee ihe nke ọma mee ka ọ dịgide Ike ndọda >200N N'okpuru mkpọtụ 20G. Enweghị ike ime ka injin ghara ịdị ike.

✅ Sistemụ NJ Waya Ngwa Ngwa
Uhie (22-16 AWG) | Anụ anụnụ (16-14 AWG) | Odo (12-10 AWG)

Aha: Gaopeng
Ụdị: PTV1.25/PTV2/PTV3.5/PTV5.5
Ihe: Ọla kọpa
Mkpuchi: PVC
Njirimara: Ọdụ waya Spade Electrical Pin

Aha: Gaopeng
Ụdị: PBDD1.25-250/PTV-2502/PTV5.5-250
Ihe: Brass
Mkpuchi: PVC
Njirimara: Piggyback Spade Connector / T Tap Splice Terminals

Nchedo zuru oke, njikọ ozugbo - Nkwụsị eletriki na-enweghị ihe egwu

✅ Mkpuchi gbọmgbọm 100%
Uwe aka PVC kechie ya nke ọma gbọmgbọm ígwè (asambodo CE), na-ewepụ ihe ndị na-eduzi ihe mberede. Na-egbochi mkpụmkpụ mberede na ihe mberede eletrik - Nchekwa 100% dị mma maka imetụ aka.

✅ Arụmọrụ Nkwụsị Ngwa Ngwa
Oghere agụba 0.25" (6.35mm) nwere isi iyi mkpọchi esemokwu, ihe nkwado 5,000+ usoro ndị enyiNdochi 70% dị ngwa karịa skru.

✅ Ogologo oge ụlọ ọrụ mmepụta ihe
Njikọ ọla kọpa a na-eji tin-plated na-eguzogide -40°C ruo 105°C, na-eguzogide mmanụ, asịd, na UV ikpughe.

✅ Koodu agba nke na-egosi njehie
Aka uwe uhie/acha anụnụ anụnụ/edo edo maka njirimara nkebi:Uhie: 22-16AWG, acha anụnụ anụnụ: 16-14AWG, acha odo odo: 12-10AWG.

Aha: Gaopeng

Ụdị: DBV

Ihe: Ọla kọpa

Mkpuchi: PVC

Aha: Gaopeng
Ụdị: SVEE
Ihe: Ọla kọpa
Mkpuchi: PVC