Seteishene se sa keneng ka har'a insulation

Lihlopha tsa Lihlahisoa

Lihlahisoa tse Hlahisitsoeng

Seteishene sa Cable sa Nko ea Koporo

SST Sekoahelo sa ho Sireletsa sa Solder se sa Keneng Metsing

Lebokose la Lihokelo tsa Lithapo tsa Splice tse Potlakileng le Pakiloe

Lebokose la Sehokelo sa Lithapo tsa T-Tap Splice le Pakiloe

Lebokose la Sehokelo sa BV PVC se Insulated Butt le Pakiloe

Sehokelo sa BHT se sa Keneng Metsing sa Heat Shrink Butt se nang le Mabokose

Li-terminal tsa Crimp tsa Lesale la Koporo tse sa keneng ka har'a insulation tsa OT

Tokiso ea Cable ea Data ea Heat Shrink Tube e sa Keneng Metsing

Switjha e Ntsho ya LED e bonesitsweng ya Rocker e nang le Boemo ba 2

Sehokelo sa Terminal se sa Keneng Metsing bakeng sa Likoloi tse Ncha tsa Motlakase tsa Matla

0102030405

Li-terminal tsa Crimp tsa Lesale la Koporo tse sa keneng ka har'a insulation tsa OT

Kgokelo e Nepahetseng, Tshireletso e Phahameng – E Entswe bakeng sa Tikoloho e Matla ya Motlakase

✅ Sleeve ea Nylon e sa Keneng Pele
Matsoho a nylon a teteaneng a khomaretsoeng li-terminal, a mamella -20°C ho isa ho +80°C, e hanela oli, mongobo le ho thothomela. Ha ho hlokahale ho fokotsa mocheso – Ho kenya ka potlako ka 50%.

✅ Ho Tsamaisa Motlakase oa Sehlopha sa Sesole
Botlaase ba koporo bo koahetsoeng ka thini, conductivity ≥28%. E lekiloe ho 20A hona joale e tsoelang pele, khanyetso ea ho kobeha ≤0.5mΩ.

✅ Ho Khouta Mebala ho Thibela ho se Tsamaisane
Matsoho a mafubelu/a maputsoa/a mosehla a latela maemo a polarity ea indasteri, ho fokotsa likotsi tsa ho se hokahane ka 90%.

✅ Ho Koalla ka Metsotsoana e 3
Sebopeho sa likulo tse nolofalitsoeng se sebetsa ka di-crimper tse tloaelehileng (AWG 22-10). Khokahano e tšepahalang le e se nang solder ka metsotsoana e 3.

Iteanye le rona

lintlha tsa sehlahisoa

Li-tag tsa sehlahisoa

TLHALOSO EA SEHLAHISOA

"Lebitso 'OT terminal' le simoloha ponahalong ea lona - hlooho ke lesale la khokahano le chitja (le bōpehileng joaloka O), 'me mohatla ke karolo e kobehang ea tubula (le bōpehileng joaloka T), e leng se etsang hore sebopeho sohle se tšoane le motsoako oa litlhaku 'OT.' Mosebetsi oa eona o ka sehloohong ke ho hokahanya lipheletso tsa lithapo kapa likhoele ka tieo ho li-terminal tsa lisebelisoa tse fapaneng tsa motlakase (tse kang li-switch, likhabote tsa kabo, li-motor, jj.), ho netefatsa phetiso e tsitsitseng ea motlakase.

Ka ts'ebetso ea eona e tšepahalang ea khokahano le boiketlo ba ho kenya, li-terminal tsa crimp tsa OT copper ring crimp li sebelisoa haholo masimong a mangata a motlakase: Kabo le taolo ea matla a indasteri: E sebelisoa bakeng sa ho hokahanya matla le mela ea taolo likhaboteng tsa kabo, likhaboteng tsa taolo, li-motor, li-inverter le lisebelisoa tse ling, e leng se etsang hore e be khetho e tloaelehileng bakeng sa maemo a othomathike a indasteri. Ho kenya motlakase ka moaho: E sebelisoa mabokoseng a kabo ea mabone le lisebelisoa tsa motlakase (joalo ka li-air conditioner tse bohareng, lipompo tsa metsi), ho netefatsa phepelo ea motlakase e tsitsitseng le e tšepahalang ka har'a mehaho. Litsamaiso tse ncha tsa matla le motlakase: Li sebelisoa ho li-inverter tsa photovoltaic, liphutheloana tsa betri ea polokelo ea matla, lisebelisoa tsa motlakase oa moea, le litsamaiso tsa betri ho hokahanya likhoele, ho netefatsa ts'ebetso e sireletsehileng tlas'a maemo a phahameng a motlakase le a hona joale. Likoloi le lipalangoang: Li sebelisoa bakeng sa ho hokahanya likhoele tsa betri ea likoloi le lithapo tse thellang 'mele, ka ts'ebetso ea bohlokoa haholo ea ho thibela ho thothomela. Tlhokomelo le ntlafatso ea lisebelisoa: E sebelisoa ho nkela li-terminal tse senyehileng sebaka nakong ea tlhokomelo ea lisebelisoa tsa fektheri kapa ntlafatso ea mohala oa khale, e leng se etsang hore e be karolo e tloaelehileng ea motlakase.

Thepa: 'Mele o moholo o entsoe haholo ka koporo (koporo ea T2) e nang le conductivity ea ho feta 99%, e netefatsang phetiso e sebetsang hantle ea motlakase. Lihlahisoa tse ling li ka sebelisa koporo ho ntlafatsa matla a mechini. Litlhare tsa bokaholimo li kenyelletsa ho betla ka tin, ho betla ka silevera, le ho betla ka nickel. Ho betla ka tin ke ntho e tloaelehileng haholo, e thibelang oxidation ea koporo ka katleho, e boloka khanyetso e tlase ea ho kopana nako e telele, le ho ba bonolo ho e solder. Ho betla ka silevera ho sebelisoa maemong a hlokang conductivity e phahameng le khanyetso ea mafome, joalo ka lisebelisoa tsa motlakase tse fetohang khafetsa kapa lisebelisoa tsa indasteri tse nepahetseng haholo. Ho betla ka nickel ho fana ka khanyetso e matla ea mocheso le mafome, e loketseng libaka tse thata.

Likarolo tsa sebopeho: Moralo oa lesale le bulehileng: Ena ke molemo o moholo oa li-terminal tsa OT. Qetello ea eona ea lesale e na le lesoba, e lumellang ho kenngoa ka kotloloho ntle le ho lokolla bolt ea lisebelisoa ka botlalo, haholo-holo e loketseng ho kenngoa kapa ho tlosoa libakeng tse thata, e leng se nolofalletsang tlhokomelo e latelang haholo. Ts'ebetso ea ho theha karolo e le 'ngoe: Li-terminal tsa boleng bo holimo hangata li etsoa ka ho etsa karolo e le 'ngoe ka ho e lahla ka tšepe kapa ka ho e hatella ka serame, ntle le ho robeha kapa ho kopanya ka bohata, sebopeho se matla, se khonang ho mamella matla a phahameng a ho tsikinyeha le ho thothomela. Moralo o teteaneng: Mohlala, mohlala oa OT-30A o na le botenya ba ho fihla ho 1.2mm, o ntlafatsa matla a mechini a terminal le bokhoni ba ho jara ba hona joale, o fokotsa kotsi ea ho futhumatsa ha maqhubu a maholo a feta.

Li-parameter tsa Tekheniki

NOMORO EA NTHO	MM MM							TLHOKOMELISO EA MARANG-RANGAWG MM²
NOMORO EA NTHO	ΦE	Φd	KA HARE	B	L1	L	T	TLHOKOMELISO EA MARANG-RANGAWG MM²
2-0.5	2.2	1	5	4	10	12.5	0.5	26-22A.WG 0.1-0.5mm²
2.5-0.5	2.7
3-0.5	3.2
3.5-0.5	3.7		6		12	15
4-0.5	4.3		6.5			15.3
5-0.5	5.3		8			16
2.5-1	2.7	1.6	6	5	11	14	0.8	22-16A.WG 0.5-1.5mm²
3-1	3.2
3.5-1	3.7
4-1	4.3		8		12	16
5-1	5.3		10		13	18
3-2.5	3.2	2.3	6	5	11	14	0.8	16-14A.WG 1.5-2.5mm²
3.5-2.5	3.7		6		11	14
4-2.5	4.3		8		12	16
5-2.5	5.3		10		14	19
6-2.5	6.5		11		16	21.5
8-2.5	8.4		14		17	24
4-6	4.3	3.6	8	6	14	18	1	12-10A.WG 4-6mm²
5-6	5.3		10		15	20
6-6	6.5		11		16	21.5
8-6	8.4		14		19	26
10-6	10.5		18		21	30
5-10	5.3	4.5	10	8	16	21	1.1	8A.WG 10mm²
6-10	6.5		11		17	22.5
8-10	8.4		14		20	27
10-10	10.5		18		21	30
12-10	13		22		23	34
5-16	5.3	5.8	11	10	20	25.5	1.2	6A.WG 16mm²
6-16	6.5		11		20	25.5
8-16	8.4		14		22	29
10-16	10.5		18		24	33
12-16	13		22		26	37
5-25	5.3	7.5	12	11	25	31	1.5	4A.WG 25mm²
6-25	6.5		12			31
8-25	8.4		16			33
10-25	10.5		18		26	35
12-25	13		22		31	42
16-25	17		28		35	49
6-35	6.5	9	15	12	26	33.5	1.6	2A.WG 35mm²
8-35	8.4		16		26	34
10-35	10.5		18		27	36
12-35	13		22		31	42
16-35	17		28		36	50
6-50	6.5	11	18	16	34	43	1.8	1/0A.WG 50mm²
8-50	8.4
10-50	10.5
12-50	13		22		36	47
16-50	17		28		40	54
6-70	6.5	13	22	18	38	49	2	2/0A.WG 70mm²
8-70	8.4
10-70	10.5
12-70	13
16-70	17		28		42	56
8-95	8.4	15	24	20	42	54	2.5	3/0A.WG 95mm²
10-95	10.5
12-95	13
16-95	17		28		44	58
8-120	8.4	16.5	24	22	44	56	3	4/0A.WG 120mm²
10-120	10.5
12-120	13
16-120	17		28		48	62
8-150	8.4	19	30	24	50	65	3.2	250/300MCM 150mm²
10-150	10.5
12-150	13
16-150	17
8-185	8.4	21	36	28	50	68	3.5	300/350MCM 185mm²
10-185	10.5
12-185	13
16-185	17
8-240	8.4	23.5	38	32	56	75	4	400/500MCM 240mm²
10-240	10.5
12-240	13
16-240	17

Seteishene sa Cable sa Nko ea Koporo

SST Sekoahelo sa ho Sireletsa sa Solder se sa Keneng Metsing

Lebokose la Lihokelo tsa Lithapo tsa Splice tse Potlakileng le Pakiloe

Lebokose la Sehokelo sa Lithapo tsa T-Tap Splice le Pakiloe

Lebokose la Sehokelo sa BV PVC se Insulated Butt le Pakiloe

Sehokelo sa BHT se sa Keneng Metsing sa Heat Shrink Butt se nang le Mabokose

Li-terminal tsa Crimp tsa Lesale la Koporo tse sa keneng ka har'a insulation tsa OT

Tokiso ea Cable ea Data ea Heat Shrink Tube e sa Keneng Metsing

Switjha e Ntsho ya LED e bonesitsweng ya Rocker e nang le Boemo ba 2

Sehokelo sa Terminal se sa Keneng Metsing bakeng sa Likoloi tse Ncha tsa Motlakase tsa Matla

Li-terminal tsa Crimp tsa Lesale la Koporo tse sa keneng ka har'a insulation tsa OT

TLHALOSO EA SEHLAHISOA

Li-parameter tsa Tekheniki

Leave Your Message

Sehokelo sa PVC se nang le Insulated Butt

Sehokelo sa Likulo tsa Basali sa PVC se Insulated

Sehokelo sa Sehokelo sa Male Spade sa PVC se Insulated

Sesebelisoa sa ho Thibela Lithapo ka Boiketsetso