Li-Lug tsa Cable

Lihlopha tsa Lihlahisoa

Lihlahisoa tse Hlahisitsoeng

Seteishene sa Cable sa Nko ea Koporo

SST Sekoahelo sa ho Sireletsa sa Solder se sa Keneng Metsing

Lebokose la Lihokelo tsa Lithapo tsa Splice tse Potlakileng le Pakiloe

Lebokose la Sehokelo sa Lithapo tsa T-Tap Splice le Pakiloe

Lebokose la Sehokelo sa BV PVC se Insulated Butt le Pakiloe

Sehokelo sa BHT se sa Keneng Metsing sa Heat Shrink Butt se nang le Mabokose

Li-terminal tsa Crimp tsa Lesale la Koporo tse sa keneng ka har'a insulation tsa OT

Tokiso ea Cable ea Data ea Heat Shrink Tube e sa Keneng Metsing

Switjha e Ntsho ya LED e bonesitsweng ya Rocker e nang le Boemo ba 2

Sehokelo sa Terminal se sa Keneng Metsing bakeng sa Likoloi tse Ncha tsa Motlakase tsa Matla

0102030405

Li-terminal tsa Tube ea Koporo ea GPH90°

Kgokelo e Nepahetseng, Tshireletso e Phahameng – E Entswe bakeng sa Tikoloho e Matla ya Motlakase

✅ Sleeve ea Nylon e sa Keneng Pele
Matsoho a nylon a teteaneng a khomaretsoeng li-terminal, a mamella -20°C ho isa ho +80°C, e hanela oli, mongobo le ho thothomela. Ha ho hlokahale ho fokotsa mocheso – Ho kenya ka potlako ka 50%.

✅ Ho Tsamaisa Motlakase oa Sehlopha sa Sesole
Botlaase ba koporo bo koahetsoeng ka thini, conductivity ≥28%. E lekiloe ho 20A hona joale e tsoelang pele, khanyetso ea ho kobeha ≤0.5mΩ.

✅ Ho Khouta Mebala ho Thibela ho se Tsamaisane
Matsoho a mafubelu/a maputsoa/a mosehla a latela maemo a polarity ea indasteri, ho fokotsa likotsi tsa ho se hokahane ka 90%.

✅ Ho Koalla ka Metsotsoana e 3
Sebopeho sa likulo tse nolofalitsoeng se sebetsa ka di-crimper tse tloaelehileng (AWG 22-10). Khokahano e tšepahalang le e se nang solder ka metsotsoana e 3.

Iteanye le rona

lintlha tsa sehlahisoa

Li-tag tsa sehlahisoa

TLHALOSO EA SEHLAHISOA

Seteishene sa tube ea koporo sa GPH 90° ke sehokelo sa motlakase se kobehileng ka lehlakoreng le letona la 90°, se etselitsoeng ka boqhetseke ho felisa li-conductor tsa koporo. Mosebetsi oa sona o ka sehloohong ke ho fihlella likhokahano tsa motlakase tse sireletsehileng, tse sebetsang hantle le tse sa hanyetseng haholo pakeng tsa lithapo le li-terminal tsa lisebelisoa, ha ka nako e ts'oanang li ntlafatsa sebopeho sa sebaka ka sebopeho sa sona se kobehileng sa mechini. Litšebeliso tsa eona tsa mantlha li kenyelletsa litsamaiso tsa kabo ea matla, taolo ea indasteri le boiketsetso, makala a macha a matla, lipalangoang tsa terene, ho aha litsamaiso tsa motlakase le litsi tsa data. Seteishene se entsoe ka koporo ea T2 e hloekileng haholo (TU2) e nang le conductivity ea ≥98%. Thepa ea koporo e na le conductivity e ntle ea motlakase, ductility, le ho hanyetsa mokhathala ka nako e telele, ho netefatsa ho tšepahala ha khokahano nako e telele. Sehlahisoa se na le khanyetso e tlase ea ho kopana, e fokotsang tlhahiso ea mocheso le tahlehelo ea matla. Se na le khanyetso e matla ea ho hula sebakeng sa crimp, moralo oa sekhutlo se letona o hanelang ho thothomela le ho sotha, le bokhoni bo phahameng ba sebaka. Moralo oa 90° o lumella terata e ntle libakeng tse thata, ho ntlafatsa botle le moea o kenang ka har'a likhabote. E boetse e fana ka khanyetso e ntle ea mafome (haholo-holo bakeng sa mefuta ea makotikoti), e etsang hore e lokele libaka tse mongobo. Ho phaella moo, moralo oa eona o tloaelehileng o loketse ho qhaqhoa ka bongata ka ho sebelisa lisebelisoa tsa letsoho kapa tsa pneumatic/hydraulic.

Li-parameter tsa Tekheniki

NOMORO EA NTHO	TEKANYO mm						LEBAKA LA TERARA AWG mm²
NOMORO EA NTHO	ΦE	ΦD	Φd	KA HARE	L2	L1	LEBAKA LA TERARA AWG mm²
GPH90-6/4	4.3	6.5	3.5	10	14	22.5	12-10 AWG 4-6 mm²
GPH90-6/5	5.3			10		22.5
GPH90-6/6	6.4			12		24.5
GPH90-6/8	8.4			15		27.5
GPH90-6/10	10.5			16		29.5
GPH90-10/5	5.3	7	4.5	12	16	23	8 AWG 10 mm²
GPH90-10/6	6.4			12		24
GPH90-10/8	8.4			15		28
GPH90-10/10	10.5			18		29.5
GPH90-16/5	5.3	8.5	5.5	12	20	22.5	6 AWG 16 mm²
GPH90-16/6	6.4			14		24
GPH90-16/8	8.4			15		28
GPH90-16/10	10.5			18		31
GPH90-16/12	13			19		32
GPH90-25/5	5.3	10	6.9	14	21	27.5	4 AWG 25 mm²
GPH90-25/6	6.4			15		27.5
GPH90-25/8	8.4			16		32.5
GPH90-25/10	10.5			18		32.5
GPH90-25/12	13			19		33.5
GPH90-35/6	6.4	12	8.5	17	24	28.5	2 AWG 35 mm²
GPH90-35/8	8.4			17		34
GPH90-35/10	10.5			20		34
GPH90-35/12	13			22		40.5
GPH90-50/6	6.4	14	10	20	28.5	37	1/0 AWG 50 mm²
GPH90-50/8	8.4					40.5
GPH90-50/10	10.5					40.5
GPH90-50/12	13			23		42.5
GPH90-50/16	17			28		50.5
GPH90-70/6	6.4	16.5	12	24	31	43	20 AWG 70 mm²
GPH90-70/8	8.4					43
GPH90-70/10	10.5					43
GPH90-70/12	13					44.5
GPH90-70/16	17			28		53
GPH90-70/20	21			30		59
GPH90-95/8	8.4	18	13.5	26	35	44.5	3/0 AWG 95 mm²
GPH90-95/10	10.5					44.5
GPH90-95/12	13					46.5
GPH90-95/14	15			28		52
GPH90-95/16	17			28		52
GPH90-95/20	21			30.5		59
GPH90-120/8	8.4	19.5	15	29	35.5	49	4/0 AWG 120 mm²
GPH90-120/10	10.5					49
GPH90-120/12	13					49
GPH90-120/14	15					52
GPH90-120/16	17					55
GPH90-120/20	21			30.5		61
GPH90-150/8	8.4	21	16.5	31	40	48	250/300 MCM 150 mm²
GPH90-150/10	10.5					48
GPH90-150/12	13					51
GPH90-150/14	15					51
GPH90-150/16	17					56
GPH90-150/20	21			34		61.5
GPH90-185/10	10.5	24	19	35	46	58.5	300/350 MCM 185 mm²
GPH90-185/12	13					58.5
GPH90-185/16	17					58.5
GPH90-185/20	21					65
GPH90-240/12	13	26	21	40	50	54	400/500 MCM 240 mm²
GPH90-240/16	17					60
GPH90-240/20	21					67.8
GPH90-300/12	13	29.5	23.5	43	59	74.5	500/600 MCM 300 mm²
GPH90-300/16	17					64
GPH90-300/20	21					70.5
GPH90-400/12	13	34	27	49	62	79	600/750 MCM 400 mm²
GPH90-400/16	17
GPH90-400/20	21

Seteishene sa Cable sa Nko ea Koporo

SST Sekoahelo sa ho Sireletsa sa Solder se sa Keneng Metsing

Lebokose la Lihokelo tsa Lithapo tsa Splice tse Potlakileng le Pakiloe

Lebokose la Sehokelo sa Lithapo tsa T-Tap Splice le Pakiloe

Lebokose la Sehokelo sa BV PVC se Insulated Butt le Pakiloe

Sehokelo sa BHT se sa Keneng Metsing sa Heat Shrink Butt se nang le Mabokose

Li-terminal tsa Crimp tsa Lesale la Koporo tse sa keneng ka har'a insulation tsa OT

Tokiso ea Cable ea Data ea Heat Shrink Tube e sa Keneng Metsing

Switjha e Ntsho ya LED e bonesitsweng ya Rocker e nang le Boemo ba 2

Sehokelo sa Terminal se sa Keneng Metsing bakeng sa Likoloi tse Ncha tsa Motlakase tsa Matla

Li-terminal tsa Tube ea Koporo ea GPH90°

TLHALOSO EA SEHLAHISOA

Li-parameter tsa Tekheniki

Leave Your Message

Sehokelo sa PVC se nang le Insulated Butt

Sehokelo sa Likulo tsa Basali sa PVC se Insulated

Sehokelo sa Sehokelo sa Male Spade sa PVC se Insulated

Sesebelisoa sa ho Thibela Lithapo ka Boiketsetso