Terminalka Ring-ga ee fudud ee la geliyo PVC-dahaaran

Faa'iidooyinka Muhiimka ah:

Guji hal-labaad, Niyad jab la'aan!
Iyada oo loo farsameeyay isku xirka korantada ee degdega ah, terminal-kayaga giraanta wuxuu leeyahay naqshad cusub oo "Easy Entry" ah oo hagta fiilooyinka si fudud - oo ku habboon meelaha cidhiidhiga ah ama rakibidda indho la'aanta. Aasaaska naxaasta ee aan ogsijiinta lahayn wuxuu dammaanad qaadayaa gudbinta ugu badan, halka dahaarka PVC ee dhumucdiisuna ay iska caabbinayso kulaylka, kiimikooyinka, iyo xoqidda.

Tilmaamaha:

Kondurka: Naxaas aan Ogsijiin lahayn oo saafi ah (99.9%)
Dahaarka: PVC-ga ololka celiya (Qiimeynta 80°C)
Nooca Terminalka: Giraan (Nooca O)
Kala Duwanaanshaha Siligga: 22-10 AWG / 0.5-6.0 mm²
Godka Booltiga: Ku habboon M4-M12 Studs
Shahaadooyinka: KANI / RoHS / ISO9001 / TUV

Ku habboon:
▶ Fiilooyinka Guddiyada Xakamaynta ▶ Qalabka Gawaarida ▶ Sanduuqyada Isku-darka Qorraxda ▶ Dayactirka Qalabka

Sababta Injineeradu noo Doortaan:
✅ Gelitaan Fudud oo Shati Leh - Rakibaadda 50% si dhakhso leh oo leh hage silig oo ballaaran
✅ Serrations-ka Ka-hortagga Simbiriirixanka - 300% iska caabin gariir oo ka wanaagsan oo leh qalooc ammaan ah
✅ Dahaarka Midabka Leh – Casaan (22-16AWG)/Buluug (16-14AWG) /Madow (14-12AWG) Jaalle (12-10AWG) oo loogu talagalay aqoonsiga cabbirka degdegga ah

Maanta Cusbooneysii Socodka Shaqadaada - Saxnaanta Xawaaraha La Kulmaysa!

Nala soo xiriir

faahfaahinta alaabta

Calaamadaha badeecada

SHARAXAADA ALAABTA

Terminaalka wareegsan ee RVEE waxaa laga sameeyay naxaas tayo sare leh, oo ah walax loo yaqaan hufnaanteeda iyo cimri dhererkeeda. Xulashadan agabka ah waxay hubineysaa in terminaalku ay u adkeysan karaan culeysyo koronto oo waaweyn iyadoo la yareynayo iska caabbinta iyo soo saarista kulaylka. Dhismaha naxaasta kaliya ma hagaajiyo waxqabadka terminaalka, laakiin sidoo kale wuxuu dheereeyaa cimriga terminaalka, taasoo ka dhigaysa xal kharash-ool ah oo loogu talagalay rakibaadda korontada ganacsiga iyo guryaha. Hadday tahay inaad ka shaqeyneyso fiilooyinka baabuurta, mashaariicda hagaajinta guryaha, ama codsiyada warshadaha, terminaalkan si taxaddar leh ayaa loogu talagalay inay daboolaan baahiyahaaga.

Mid ka mid ah sifooyinka ugu muhiimsan ee terminaalka RVEE ee wareegsan ee dahaaran waa dahaarka PVC-ga. Dahaarkani wuxuu bixiyaa lakab dheeraad ah oo ilaalin ah oo ka dhan ah arrimaha deegaanka sida qoyaanka iyo boodhka oo saameyn kara isku xirka korontada. Maaddada PVC-gu ma aha oo kaliya inay u adkaysato xoqidda, laakiin sidoo kale waxay leedahay sifooyin dielectric oo aad u fiican, taasoo hubinaysa in terminaalku ay ilaaliyaan daacadnimadooda waqti ka dib. Tani waxay ka dhigaysaa terminaalka RVEE mid ku habboon in loo isticmaalo deegaanno kala duwan, laga bilaabo rakibaadda bannaanka ilaa deegaannada warshadaha ee adag.

Marka la eego kala duwanaanshahooda, terminaalka wareegsan ee RVEE ee dahaaran ayaa laga heli karaa cabbirro kala duwan, oo ay ku jiraan RVEE1.25, RVEE2, RVEE3.5 iyo RVEE5.5. Kala duwanaanshahani wuxuu u oggolaanayaa isticmaalayaasha inay doortaan cabbirka terminaalka ee ku habboon iyadoo lagu saleynayo shuruudaha gaarka ah ee codsigooda. Hadday tahay inaad u baahan tahay terminaal yar yar oo loogu talagalay fiilooyin jilicsan ama terminaal waaweyn oo loogu talagalay isku xirka culus, Gao Peng wuxuu dabooli karaa baahiyahaaga. La qabsigani wuxuu ka dhigayaa terminaalka RVEE doorashada koowaad ee koronto yaqaannada, injineerada iyo kuwa hiwaayadda u baahan isku xirka korontada ee la isku halleyn karo oo hufan.

Terminaalka RVEE ee wareegsan ee Gao Peng waa isku-darka ugu fiican ee tayada, cimri dhererka, iyo kala-duwanaanta. Iyada oo la adeegsanayo dhismaha naxaasta iyo dahaarka PVC, terminaalkan waxaa loogu talagalay inay bixiyaan xiriir ammaan ah oo u adkaysan doona imtixaanka waqtiga. Hadday tahay inaad bilaabayso mashruuc cusub ama aad casriyeynayso nidaam koronto oo jira, terminaalka RVEE waa maalgashi lagu kalsoonaan karo iyo waxqabad. Dooro terminaalka RVEE ee wareegsan ee Gao Peng si aad u hesho dadaalkaaga korontada ee xiga oo la kulan farqiga ay qaybaha tayada ahi sameeyaan.

Halbeegyada Farsamada

Lambarka Shayga	CABBIRKA STUD-KA		CABBIRKA mm							Xirmo PCS/XIRMO	MIDAB	SHARAXAAD
Lambarka Shayga	Mareykan ah	Metric d2	B	F	L	IYO	D	d1	T	Xirmo PCS/XIRMO	MIDAB	SHARAXAAD
RVEE1.25-3	#4	3.2	5.7	5.0	18.7	10.7	5.8	4.2	0.7	1000	Casaan	Qaybta Rasaasta: 0.5~1.5mm2 (AW.G.22~16) Ugu badnaan Currentlmax=19A Qalabka:Dahaadhka Naxaasta:PVC
RVEE1.25-3.5S	#6	3.7	5.7	5.0	18.7
RVEE1.25-3.5M	#6	3.7	6.6	6.3	20.4
RVEE1.25-3.5L	#6	3.7	8.0	7.0	21.7
RVEE1.25-4S	#8	4.3	6.6	6.3	20.4
RVEE1.25-4L	#8	4.3	8.0	7.0	21.7
RVEE1.25-5S	#10	5.3	8.0	7.0	21.7
RVEE1.25-5L	#10	5.3	9.5	7.5	23.0
RVEE1.25-5LL	#10	5.3	11.6	11.3	27.7
RVEE1.25-6S	1/4	6.5	9.5	7.5	23.0
RVEE1.25-6L	1/4	6.5	11.6	11.3	27.7
RVEE1.25-8	5/16	8.5	11.6	11.3	27.7
RVEE1.25-8L	5/16	8.5	13.7	13.9	31.6
RVEE1.25-10	3/8	10.5	13.7	13.9	31.6
RVEE1.25-10L	3/8	10.5	18.0	15.0	34.7
RVEE1.25-12	1/2	13.0	18.0	15.0	34.7
RVEE1.25-14	9/16	15.0	27.0	21.0	45.2					500
RVEE1.25-16	5/8	17.0
RVEE1.25-18	11/16	19.0
RVEE1.25-20	3/4	21.0
RVEE2-3	#4	3.2	6.6	4.3	18.4	11.0	6.4	4.5	0.8	1000	Buluug	Qaybta Rasaasta: 1.5- 2.5mm2 (AW.G.16~14) Ugu badnaan Currentlmax=27A Qalabka:Dahaadhka Naxaasta: PVC
RVEE2-3.5S	#6	3.7		4.3	18.4
RVEE2-3.5M	#6	3.7		6.3	20.4
RVEE2-3.5L	#6	3.7	8.5	7.4	22.4
RVEE2-4S	#8	4.3	6.6	6.3	20.4
RVEE2-4L	#8	4.3	8.5	7.4	22.4
RVEE2-5S	#10	5.3	8.5		22.4
RVEE2-5L	#10	5.3	9.5		23.0
RVEE2-6S	1/4	6.5	9.5		23.0
RVEE2-6L	1/4	6.5	12.0	11.0	27.4
RVEE2-8	5/16	8.5	12.0	11.0	27.4
RVEE2-8L	5/16	8.5	13.6	13.9	31.4
RVEE2-10	3/8	10.5	13.6	13.9	31.4
RVEE2-10L	3/8	10.5	18.2	15.0	35.2
RVEE2-12	1/2	13.0	18.2	15.0	35.2
RVEE2-14	9/16	15.0	27.0	21.0	45.2
RVEE2-16	5/8	17.0								500
RVEE2-18	11/16	19.0
RVEE2-20	3/4	21.0
RVEE3.5-3	#4	3.2	8.0	8.0	26.0	14.0	7.0	5.2	1.0	500	Madow	Qaybta Rasaasta: 2.5-4mm2 (AW.G.14-12) Ugu badnaan Currentlmax=37A Qalabka:Dahaadhka Naxaasta: PVC
RVEE3.5-3.5	#6	3.7
RVEE3.5-4	#8	4.3
RVEE3.5-4M	#8	4.3	9.5	8.3	28.0
RVEE3.5-5S	#10	5.3	8.0	8.0	26.0
RVEE3.5-5M	#10	5.3	9.5	8.3	28.0
RVEE3.5-5L	#10	5.3	12.0	9.5	29.5
RVEE3.5-6	1/4	6.5	12.0	9.5	29.5
RVEE3.5-8	5/16	8.5	15.0	13.5	35.0
RVEE3.5-10	3/8	10.5	15.0	13.5	35.0
RVEE3.5-12	1/2	13.0	19.2	16.0	40.0
RVEE5.5-3	#4	3.2	7.2	6.0	23.7	14.2	7.5	5.8	1.0	500	Jaalle	Qaybta Rasaasta: 4-6mm2 (AW.G.12-10) Ugu badnaan Currentlmax=48A Qalabka:Dahaadhka Naxaasta: PVC
RVEE5.5-3.5	#6	3.7
RVEE5.5-4S	#8	4.3
RVEE5.5-4L	#8	4.3	9.5	8.2	27.0
RVEE5.5-5	#10	5.3	9.5	8.2	27.0
RVEE5.5-6	1/4	6.5	12.0	10.5	30.3
RVEE5.5-6M	1/4	6.5	12.0	13.0	33.0
RVEE5.5-8	5/16	8.5	15.0	13.5	34.8
RVEE5.5-10	3/8	10.5	15.0	13.5	34.8
RVEE5.5-12	1/2	13.0	19.2	16.0	40.0
RVEE5.5-14	9/16	15.0	32.0	25.2	55.2					200
RVEE5.5-16	5/8	17.0
RVEE5.5-18	11/16	19.0
RVEE5.5-20	3/4	21.0